	Català Español

Centralized Lubrication Systems, Hydraulics and Pneumatics

Oil Air Lubrication

Fittings & Acc.

SHOWA SINGLE LINE LUBRICATION. RESISTENCE SYSTEM.

	Showa MLA gear pump. These pumps are designed for continuous circulating oil distribution in resistance type systems. Flow rates from 0.05 l/min up to 10 l/min.		Showa MLC gear pump. These pumps are compact and light version. They are also designed for continuous circulating oil distribution in resistance type systems. Flow rates up to 1 l/min.
	Showa MLD gear pump. These pumps are compact and light version. They are also designed for continuous circulating oil distribution in resistance type systems. Flow rates up to 10 l/min.		Showa YMAS piston pump. The YMAS piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes. Discharge volumes can be adjusted in 1 cc increments.
	Showa YMB piston pump. The YMB piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes. Discharge volumes can be adjusted in 0.5 cc increments.		Showa SMA piston pump. The SMA piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes. Discharge volumes can be adjusted in 0.5 cc increments.
	Showa SMD piston pump. The SMD piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes. Discharge volumes can be adjusted in 0.5 cc increments.		Showa SSMA piston pump. The SSMA piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with fix output volume. This model is a compact design.
	Showa MY6 accumulator pump. By utilizing an IC timer the MY6 pump can be set to discharge oil from a wide range of selectable times. The pump's discharge volume can be set between 1 - 6 cc.		Showa MV continuous pump. The MV model is an automatic pump enables continuous lubrication within a resistance type system. There are two discharge volume types available.
	Showa LA manual pump. The LA model is a simple oil manual pump. Distribution of oil is induced by the lever. There are three different models.		Showa HLA7 manual pump. The HLA7 model has a variable dispensing volume of 1cc/stroke to 7cc/stroke which can be adjusted.
	Showa LD manual pump. The LD manual pump dispenses oil after the handle has been pulled and released. There are two different models.		Showa A manual pump. The oil is distributed by a single pull and release of the handle. This lubrication pumps has a squared flange to mount in any kind of reservoir. Different dispensing volumes can be selected.
	Showa BM manual pump. The oil is distributed by a single pull and release of the handle. This lubrication pumps has a rounded flange to mount in any kind of reservoir. Different dispensing volumes can be selected.		Showa FA manual pump. This model uses the A pump which is assembled in a 2 liter plastic tank. Different dispensing volumes can be selected.
	Showa EA8 manual pump. The oil is distributing by a single pull and release of the handle. This pump can be mounted in the left or in the right in relation of machine.		Showa EA3 manual pump. The smallest oil pump with a plastic tank of 140 cc. Functioning is the same as the other models.
	Showa VA valve. VA valves are flow adjustable resistance type distribution junctions. This type has distribution valves in each side of the main chamber.		Showa VB valve. VB valves are flow adjustable resistance type distribution junctions. This type has distribution valves in one side of the main chamber.
	Showa Proper Unit P. Flow proper units are to be installed within a resistant type lubrication system utilizing the intermittent and cyclic distribution method.		Showa Continuous Unit C. Continuous units can be used for either the resistant type system utilizing the continuous distribution method or in grease distribution systems.

c/ Pereda, 28 Pol. Ind. Monsolís 08930 Sant Adrià del Besòs (Spain) Phone 00 34 934 62 13 00 Fax 00 34 934 62 24 75 email neubor@neubor.com

Copyright © 1998 - 2009 Neubor, s.l. All rights reserved.