Centralized Lubrication Systems, Hydraulics and Pneumatics

SHOWA CONTINUOUS UNIT

Continuous Units can be used for either the resistant type system utilizing the continuous distribution method or in grease distribution system. They allow a controlled delivery of oil /grease and can be attached to DA or DB model Distribution Blocks or individual lubrication segments.

Three types of connector combinations are available (CSS, CST and CST), each with a selection of five oil/ grease flow rates. As the classification number increases a step, the flow rate doubles, enabling flow manipulation to the desired effect.

Please do not use the Continuous Units with volumetric type pumps (pressure displacement mechanism).

Models and Technical Features

Model Type	Connection Size		Flow Value	Operating Pressure (MPa)	Recommended Viscosity (cSt)
	IN	OUT
CSS1	M8 x 1.0	M8 x 1.0	1.2	0.15 - 2 (1.5 - 20 Bar)	20 - 500
CSS2			2.5
CSS3			5.0
CSS4			10.0
CSS5			20.0

Model Type	Connection Size		Flow Value	Operating Pressure (MPa)	Recommended Viscosity (cSt)
	IN	OUT
CST1	M8 x 1.0	R 1/8	1.2	0.15 - 2 (1.5 - 20 Bar)	20 - 500
CST2			2.5
CST3			5.0
CST4			10.0
CST5			20.0

Model Type	Connection Size		Flow Value	Operating Pressure (MPa)	Recommended Viscosity (cSt)
	IN	OUT
CTT1	R 1/8	R 1/8	1.2	0.15 - 2 (1.5 - 20 Bar)	20 - 500
CTT2			2.5
CTT3			5.0
CTT4			10.0
CTT5			20.0