Centralized Lubrication Systems, Hydraulics and Pneumatics

SHOWA MOA OIL- AIR UNIT

The MOA Oil-Air lubrication unit utilizes compressed air to deliver small amounts of oils to lubrication points.

Delivering oil to the lubrication points by a continuous flow of air, the unit can help control rising temperatures and enable balance lubrication of bearings to take place. The MOA unit features a timer and also possesses various sensor mechanisms to detect lubrication status.

Depending upon installation and system requirements, the units are available with a distribution block (DM model) installed internally or without.

Technical Features

Discharge Volume	Air Pressure	Max. Lubrication Ports	Effective Tank Capacity	Viscosity Range	Power	Resting Timer	Warning Triggers
5 cc/st	0.3 MPa (3 Bar)	5 Ports	0.85 L	10 - 2000 cSt	AC100V (50/60 Hz)	2, 4, 8, 16, 24, 32, 48, 60, 128, 192	Pressure Surge/ Loss,Low Oil Level

Models

Model Type	Number Discharge Ports			Discharge Volume
MOA(*)(♦)	(*)	0	No Distribution Block
		1	1 Port Block	(♦)	1	0.01 cc/st
		2	2 Port Block		3	0.03 cc/st
		3	3 Port Block		6	0.06 cc/st
		4	4 Port Block		10	0.10 cc/st
		5	5 Port Block		16	0.16 cc/st

* Other electrical model pumps are available for this lubrication system. Neubor supplies special models for oil air systems.