Centralized Lubrication Systems, Hydraulics and Pneumatics

SHOWA DS*Z PISTON DISTRIBUTOR

The DS*Z Injector Block is a volumetric type piston distributor based upon the DSB model. However, the DS*Z model is far more compact and can distribute smaller quantities of oil with high accuracy.

The Injector Block is created from die-cast zinc and possesses indicator pins, allowing visual confirmation of operation. As the piston is pushed upwards by the stored oil, indicator pins protrude from atop of the block. The pins will return to their original position as the piston is pushed down to distribute the pre-set amount of oil.

Model

Model Type	Number of Ports	Nipple Number	Discharge Number	Pressure	Inlet Thread	Outlet Thread
DS*Z	2, 3, 5, 8	3	0.03 cc	1 - 3	M10 x 1	M8 x 1
		5	0.05 cc
		8	0.08 cc
		10	0.10 cc

* Example of reference : DS (*) Z + (XXXXX) = Model type + (*) Number of ports + (X) Discharge Vol.
  DS3Z + 3 + From left to right (0.03cc, 0.08cc, 0.08cc) = DS3Z388