The DPB2L model is a volumetric type piston distributor, utilizing the pump’s to distribute a pre- measured amount of oil from each port.
This model has visual indicators to confirm operation. As the pistons are pushed upwards by the stored oil, indicator pins protrude from atop of the plunger. Discharge volumes are the same as the DPB2 type Injector.
Models
Model
Type
Number
of Ports
Nipple Number
Discharge Volume
Pressure
Inlet
Thread
Outlet
Thread
DPB2L
1, 2, 3, 5,
6, 8, 10
4
0.10 cc
0.8 - 3 MPa
M12 x 1
M8 x 1
5
0.20 cc
6
0.40 cc
7
0.60 cc
* Re-supply pressure: 0.05Mpa
* Recommended Viscosity: 20 to 500 cSt
* Example of reference : DBP2L(*) + (XXXXX) = Model type + (*) Number of ports + (X) Discharge Vol.
DPB2L + 5 + 44675 From left to right (0.10cc, 0.10cc, 0.40cc, 0.60cc, 0.20cc) = DPB2L544675