Taco has launched to the market the Water / Oil Mist unit type MW2. This new technology gives a new solution on the all kind of mechanical working processes as lathing, milling, machining, drilling and sawing. The semi dry processing only with the oil mist power, known as MQL systems, it is not effectively due by the impossibility to maintain the accuracy by the heat created during the processing this means that the tool is not being cooled properly, the oil allows a better finished surface and the oil mist or MQL system is the most ecological way to lubricate it, but heat is an important problem to solve.
The unit MW2 gives the final solution to this problem because with only one device is possible to pulverize water and oil to the tool. The cooling power of the water creates an effect which even with processing the nonferrous material such as the aluminum or ferrous material such as steel the heat generation is relatively small.
Cutting lubricant is injected to the water mist in two different ratios to rust prevention besides the water is tap water and oil can be biodegradable.
The unit disposes two different reservoirs one for water and the other for the oil. The oil pump can be adjusted from 1 to 60 shots/minute and each shot dispenses 0.015 cc of oil.
The water pump can be adjusted from 1 to 200 shots/minute and each shot dispenses 0.1 cc. Depending on the material to work it is mandatory to adjust different ratios of water/oil to get the best performance and results.
There are different versions of the unit MW2 like the voltages and electrical controls and other devices.
This product is oriented to tool machine users and resellers who want to offer an additional service to their customers.